Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16
  1. #1

    12k for this Project Boat...got to be a "steel"

    Holly hand grenade Batman, that's a project of such large proportions, the 12k ask must be for the rental space this guy owes the yard.

    Maybe there is enough salvage steel to off set the cost to buy it.

    https://miami.craigslist.org/brw/boa...470663617.html

  2. #2

    Re: 12k for this Project Boat...got to be a "steel"

    It says $120,000 now. They must have caught their mistake

  3. #3

    Re: 12k for this Project Boat...got to be a "steel"

    It’s 120,000.00 not 12,000.00
    SEVEN
    1979 53' MY Hull #563
    Antioch, California

  4. #4

    Re: 12k for this Project Boat...got to be a "steel"

    Isn't that 120K?

    You could not cut it up for scrap and get 12K, I don't think.

    If you want to build yourself a Feadship, here's your hull, to start with. \\

    Sad to see it like this. This was some rich person's pride and joy way back when. It could tell you some stories, I'll bet.

  5. #5

    Re: 12k for this Project Boat...got to be a "steel"

    I think you miscounted the zero's.... looks like 120 K to me.

    About 20 years ago a friend of mine bought a 110' steel hull MY that needed to be finished but it ran.
    He took a crew with him to the Virgin Islands and proceeded to cruise it home to NJ. After about 6 weeks
    they finally arrived. To call it a fun trip would be a joke. Long story short, it sat at his marina for about
    19 years (in the water most of the time) and was never completed. After he died his kids had to hire
    a scrap company to cut it up and remove it, by order of the Department of Environmental Protection.
    Be very careful what you wish for.

    Walt

  6. #6

    Re: 12k for this Project Boat...got to be a "steel"

    I looked on the Feadship Heritage web site, but I could not find her.

  7. #7

    Re: 12k for this Project Boat...got to be a "steel"

    "Just needs engines and a paint job."

  8. #8

    Re: 12k for this Project Boat...got to be a "steel"

    Oops, got the price wrong. Guess I shouldn't post pass my bedtime........

  9. #9

    Re: 12k for this Project Boat...got to be a "steel"

    91 foot waterline and only 18' beam, no wonder it only needed a pair of 12/71Ns to reach 12kts: it's practically a canoe!

  10. #10

    Re: 12k for this Project Boat...got to be a "steel"

    Last edited by ralexa6808; 02-04-2018 at 05:43 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts