Looking for a replacement for my cabin entry door. It's a 46' 1980 convertible.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 11
Thread: Cabin entry door needed
-
01-04-2018 05:03 PM #1Registered Member
- Join Date
- Dec 2017
- Posts
- 31
Cabin entry door needed
-
01-04-2018 06:37 PM #2Senior Member
- Join Date
- Apr 2005
- Posts
- 2,771
Re: Cabin entry door needed
I just replaced my two wing doors and the salon entrance door on my 1982 Series 1, 48 MY. My old
doors are painted with awlgrip (over teak) and the windows should be either replaced or gone over
with tinting film. If you can use them they are yours. Post your dimensions and I'll check these . They
are in NJ and they would need to get picked up. You can get an idea of what they look like on the
Brochures section of this forum...
Walt
-
01-05-2018 12:46 PM #3Senior Member
- Join Date
- Apr 2005
- Posts
- 3,531
Re: Cabin entry door needed
I built one from solid teak last winter for my 43C. Came out pretty good. I can send you pics if you want to try building your own.
Everyone should believe in something - I believe I will go fishing - Henry David Thoreau
-
Re: Cabin entry door needed
With a name dirtyboat you have to post pictures. Start to finish.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
01-06-2018 08:23 AM #5Registered Member
- Join Date
- Dec 2017
- Posts
- 31
-
01-06-2018 08:33 AM #6Registered Member
- Join Date
- Dec 2017
- Posts
- 31
-
01-06-2018 01:28 PM #7Senior Member
- Join Date
- Apr 2005
- Posts
- 2,771
Re: Cabin entry door needed
Well 2 out of 3 dimensions are fine but the 30" width is off quite a bit. The wing doors are only 20" w
and the salon door is 23" If you (or anyone else) would like to have them I will hold on to them until
they can be picked up. BTW I don't know if I mentioned it but they are free..........
Walt
-
01-06-2018 01:52 PM #8Registered Member
- Join Date
- Dec 2017
- Posts
- 31
-
03-06-2019 07:06 PM #9Registered Member
- Join Date
- Dec 2017
- Posts
- 31
Re: Cabin entry door needed
bump! just wondering if there's anyone out there that may have one laying around
-
Re: Cabin entry door needed
IMG_7215.jpgIMG_7214(1).jpgIMG_7213(1).jpg Built a door. this is the door I built for my 45' much better than the foolish inswing design your trying to go back with. I used the Grant tracks and sheaves that the motor yachts use for pilot house doors as well as the hatteras (skandvick?) door latching hardware. If only the site could figure out how to manage pictures in the attitude they are uploaded....its been how many years with this uploading problem?