Is it known what alloy was used to make the salon window frames? Doing some repair and modification and knowing the alloy/which wire to use would be immensely helpful. I'm assuming a 5xxx alloy but I have no test material to play with. Only the actual frames so it's right the first time or it's ruined. Thanks
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 12
Thread: Aluminum window frame alloy
-
Aluminum window frame alloy
-
Re: Aluminum window frame alloy
Call Sams if you don't get the answer here.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
Re: Aluminum window frame alloy
6063 T5 Alloy 5356 Wire.
-
07-14-2017 12:28 AM #4Senior Member
- Join Date
- Apr 2005
- Posts
- 2,771
Re: Aluminum window frame alloy
Sam's used to stock the original window frame extrusions if you feel you need new window frames. Sometimes it's better and faster to make new one's and have them powder coated or anodized (Duranautic). I bought some lengths from Steve McPhearson years ago and made new sliding frames that were an exact match to the factory units right to the brown Duranutic finish. Sam's may still have some on hand.
Walt
-
07-15-2017 02:14 PM #5Senior Member
- Join Date
- Nov 2006
- Posts
- 174
Re: Aluminum window frame alloy
Fiberglass window frame extrusion from Sams. Great Product.
-
07-15-2017 10:19 PM #6Senior Member
- Join Date
- Jun 2007
- Posts
- 4,974
Re: Aluminum window frame alloy
Does anybody make Stainless Steel window frames?
FTFD... i drive a slow 1968 41c381
-
07-15-2017 11:32 PM #7Senior Member
- Join Date
- Apr 2005
- Posts
- 185
Re: Aluminum window frame alloy
the thread below had a few pictures of absolutely beautiful stainless window frames.
the thread is ten years old and i believe the starman is no longer active.
freebird may have some info.
http://www.samsmarine.com/forums/sho...ight=boss+lady
-
07-16-2017 12:26 AM #8
-
07-16-2017 08:59 AM #9Senior Member
- Join Date
- Jun 2007
- Posts
- 4,974
-
Re: Aluminum window frame alloy
http://www.boatwindowframes.com/about-us-2
Brodus replaced mine. Every year i had to sand prime and paint the old ones once the cancer starts hard to stop. Give him a call not sure but i believe he has two moles one seals and one for sliders.
Mine are fixed the 52 featured is my boat. He did not show picks of the side windows. They are not sliders they are fixed. He will sell just the stock. U do the rest cut and fiberglass to match your sizes. GOOD LUCK