37C Cutlass Bearing Advice

[hcalmar]

Working on the running gear yesterday and noticed that a rubber sleeve from what I assume is a cutlass bearing, behind the stuffing box at the thru hull has worked back exposing 1.5" of the rubber. Does anyone have experience replacing this part? I assume it is a cutlass bearing. Is it the same size as the one in the strut? I have to remove the shaft and pull it from the outside? Can't leave it alone can I?
Love to know the dimensions and part #. Of course I notice this now!
Any help is very appreciated. Hal

[hcalmar]

Pictures addedPhoto_042615_001.jpgPhoto_042615_002.jpgPhoto_042615_003.jpg

[Boatsb]

Pull the shaft. Pull the set screws and replace it.

While your at it change the stuffing box hoses and clamps. It's the same labor to pull the shafts for the cutlass bearings as it is for the stuffing boxes.

[dsharp]

How do they get water to the cutlass bearing to lubricate it?

[hcalmar]

There is a small hose that runs from the raw water intake to the flange. In the past I have forgotten about that and sent a lot of antifreeze on the ground when winterizing!

[bobk]

SAMS will have the bearing. In my case, you cut a shaft bearing in two. My 48 has no lubrication for the rudder shafts. That shaft rotates very slowly and doesn't need it.

Bobk

[hcalmar]

These old Hatts are a learning experience. Good thing Sam's is here.
FWIW I have learned that this Bearing,1 3/4 X2 3/8 x 7":

Bearing.jpg

Fits in this Strut Recessed Port 1 3/4 ID Bearing CMC-3:

recessed strut.jpg

All 7" of it.
Given that I wonder how critical it is that I replace it immediately!
H

[Avenger]

Keep running it. Maybe it will fix itself.

[Bob Bradley]

Here's a pic of a simple puller I made to get the front coupling off if you decide to do the job.


20150111_154014.jpg

[Boatsb]

These old Hatts are a learning experience. Good thing Sam's is here.
FWIW I have learned that this Bearing,1 3/4 X2 3/8 x 7":

Attachment 17866

Fits in this Strut Recessed Port 1 3/4 ID Bearing CMC-3:

Attachment 17867

All 7" of it.
Given that I wonder how critical it is that I replace it immediately!
H

Like the cardiologist that said don't hurry to get the triple bypass. We can do a quadruple next year if you live that long.

Scroddy you need a better emoticon for sarcasm.