Pix or it didn't happen!
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 11 to 15 of 15
Thread: PIZZAZ Update 41 Chris Craft
-
05-03-2020 09:46 PM #11Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
-
Re: PIZZAZ Update 41 Chris Craft
Seal the tape edge with some paint thats the same color as the adjacent. That will fill the bleed under, then the next color goes on top. Tape comes off with a clean new color edge. color
yachtsmanWILLY
I used to think I knew everything until I found the experts HERE; Now I know I dont know SQUAT
www.flybridge.proboards.com
Uncensored, no nonsense boating fun for adults
-
Re: PIZZAZ Update 41 Chris Craft
Its good to have you back posting again yachtsman. The mechanical knowledge that you willingly had out is valuable and useful. The method of the shaft coupling removal in the other thread is a great tip. I don't believe there is room to get a puller in that area to remove the coupling.
Walt Hoover
-
Re: PIZZAZ Update 41 Chris Craft
Thanks Walt... nowadays I just hit-n-run ... ws
yachtsmanWILLY
I used to think I knew everything until I found the experts HERE; Now I know I dont know SQUAT
www.flybridge.proboards.com
Uncensored, no nonsense boating fun for adults
-
Re: PIZZAZ Update 41 Chris Craft
Apply the product in super thin coats and away from the tape edge. Tip up and away from edge tip down away from edge then through the middle. Hope that makes sense.
SEVEN
1979 53' MY Hull #563
Antioch, California