I'm installing a new pressure switch and would appreciate information on the recommended pressure settings for this system. Thanks.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 3 of 3
-
10-05-2014 02:35 PM #1Registered Member
- Join Date
- Oct 2011
- Posts
- 15
Pressure setting for shipboard water pump (for 53' FBMY)
Nick Clesceri
-
Re: Pressure setting for shipboard water pump (for 53' FBMY)
the 25-40PSI range is pretty good. Most common mechanical pressure switches have a 15-20PSI differential between cutout/cut in so although you can adjust them, you can't change the pressure spread. Ours is set at around 40 psi cut out which means the pump triggers when the pressure drops to around 25. Be sure the expansion tank pressure is set properly based on the pump setting for best system performance (about 2psi below cut in pressure).
Last edited by MikeP; 10-05-2014 at 03:01 PM.
Mike P
San Miguel de Allende, Mexico; Kent Island MD; San Antonio TX
1980 53MY "Brigadoon"
-
10-05-2014 03:52 PM #3Registered Member
- Join Date
- Oct 2011
- Posts
- 15