Does anyone have a working usable rudder indicator gage. Mind got water in it and it is not working. Called the company and ask if it was suppose to be waterproof and they said no. Well, my flybridge is not enclosed. Need to figure out what to do when I get another one if it is not waterproof.
Thanks,
captbuddy
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 16
Thread: Need Rudder indicator gage
-
Need Rudder indicator gage
-
Re: Need Rudder indicator gage
I have a Furuno rudder angle gauge. Are you interested? I am working away from home but when I get back on Friday I can check the model number. Purchased and never installed because the autopilot has angle gauge built in.
Tom
-
Re: Need Rudder indicator gage
I have a Raritan display that I just removed from an inside console, so its in good cond. From their website it looks like any Raritan display will work on their system. Who built the one you have now?
Eric
41TC 1966 Hull #53 "Requisite"
Kent Island, MD/Ft. Lauderdale, FL
"Though she creaks - She holds"
-
Re: Need Rudder indicator gage
Sea Eric,
I also have a Raritan unit. Bought it a few years ago and did not know it was not waterproof. Installed it on the flybridge which is not enclosed. If I replace it with another one, I need to figure out how to keep it out of the weather. How much are you asking for your unit?
Thanks,
captbuddy
-
Re: Need Rudder indicator gage
The one I have looks like this. Make me an offer.
Eric
41TC 1966 Hull #53 "Requisite"
Kent Island, MD/Ft. Lauderdale, FL
"Though she creaks - She holds"
-
Re: Need Rudder indicator gage
Eric,
That is different looking than mine. Can you give me the measurements of yours to see if it will cover my hole in the dash.
Thanks,
captbuddy
-
Re: Need Rudder indicator gage
The face of the panel is 3 3/4" X 2". The hole it fits in is 3 1/4" X 1 1/2".
Eric
41TC 1966 Hull #53 "Requisite"
Kent Island, MD/Ft. Lauderdale, FL
"Though she creaks - She holds"
-
Re: Need Rudder indicator gage
Eric,
I will get back with you. Let me measure my hole.
Thanks,
captbuddy
-
08-11-2021 06:50 PM #9Registered Member
- Join Date
- Sep 2005
- Posts
- 8
-