white face VDO 12Volt system.
VDO 0-80psi engine, #350-523 (3 avail) $20 each VDO sending unit 80psi 1/8npt #360-003D $10
VDO 0-400psi gear #1-221-015-040A (3 avail) $20 each VDO senders 350psi 1/8npt #360-431D $10
VDO Temp to 250degree #1-231-015-647A (1 only) $20 VDO temp sender 1/2npt #323-419D $10
VDO Volt 0- 16V #1-242-015-195A (1 only) $20
VDO TACH 0-3000 #1-211-150-364A 12Volt $50 (1 only)
VDO Fuel 0-1 #1-261-016-240 $20 (1 only)
Plus shipping can go priority mail
if interested email me rwlehm@aol.com
VDO gage sending units.jpg
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 12
-
06-08-2013 11:28 AM #1Registered Member
- Join Date
- Apr 2005
- Posts
- 48
VDO gages white faced, price adjustment
Last edited by Roger; 12-15-2014 at 05:44 PM.
-
06-17-2014 10:13 AM #2Registered Member
- Join Date
- Apr 2005
- Posts
- 48
Re: VDO gages and ISSPRO pyro white faced
still available, rare white face VDO from my 1996, 39 Express
Make an offer for one or all gauges
-
12-04-2014 11:12 AM #3Registered Member
- Join Date
- Apr 2005
- Posts
- 48
Re: VDO gages and ISSPRO pyro white faced
Still available, all NEW never installed, open to all offers
Last edited by Roger; 12-04-2014 at 11:14 AM.
-
Re: VDO gages and ISSPRO pyro white faced
Roger,
Are the senders for a dual guage hookup?
ArtTrouble
43DCFB DC-306
AYC NY
-
12-04-2014 03:31 PM #5Senior Member
- Join Date
- Apr 2005
- Posts
- 3,531
Re: VDO gages and ISSPRO pyro white faced
I've been considering pyrometers for some time now, but I have little to no experience with them. What else is needed in addition to the gauge to complete the installation? Are these gauges readily available so that I could purchase a matching one for it?
Obviously, I need to run a pair of wires from my bridge down to the ER. My exhaust has small ports on the top that have what appear to be 1/4npt pipe plugs installed in them. I presume these would be replaced with a sender of some sort. Can you advise? Thanks.
BobEveryone should believe in something - I believe I will go fishing - Henry David Thoreau
-
12-04-2014 06:56 PM #6Registered Member
- Join Date
- Apr 2005
- Posts
- 48
Re: VDO gages and ISSPRO pyro white faced
Temperature sensor is installed in port on exhaust riser and wires must be run up to gage on bridge.
These ISSPRO units are available and info is available at ISSPRO.com
-
12-11-2014 08:25 AM #7Registered Member
- Join Date
- Apr 2005
- Posts
- 48
Re: VDO gages and ISSPRO pyro white faced
Art
All senders control one gauge, meaning one engine oil pressure sender is for the related oil gauge. They Pyros are also individual as you would have a sender and gauge for each engine.
Hope that clarifies
Open to all offers as the units are just in storage. I bought the gauges from Sams to keep as back up as they are no longer available, but sold boat and forgot I had these in garage.
Roger
-
12-11-2014 10:29 AM #8Senior Member
- Join Date
- Apr 2005
- Posts
- 3,531
Re: VDO gages and ISSPRO pyro white faced
Roger,
I will take the pyrometer if it is still available. I'll send you a pm with my contact info.
BobEveryone should believe in something - I believe I will go fishing - Henry David Thoreau
-
12-12-2014 10:42 AM #9Registered Member
- Join Date
- Apr 2005
- Posts
- 48
-
12-15-2014 05:44 PM #10Registered Member
- Join Date
- Apr 2005
- Posts
- 48
All Prices reduced