Looks great. These are self-contained units, right? When I replace mine, I'll look at Flagship- everyone seems to like them.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1,831 to 1,840 of 1855
Thread: 1969 Chris Craft Roamer 46 refit
-
Re: 1969 Chris Craft Roamer 46 refit
-
08-01-2023 06:08 PM #1832Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
Re: 1969 Chris Craft Roamer 46 refit
Yup. The salon is 16k, the aft stateroom is 12k, and the v-berth is 9k, and all came with scroll compressors, so the start-up current draw is only 110% of normal running current. I think my total with all three running is ~15 amps at 220vac. All of the other big boats I've had came with the late-'60s era OEM split systems with piston compressors. The difference in amp draw and sound is incredible.
-
Re: 1969 Chris Craft Roamer 46 refit
yachtsmanWILLY
I used to think I knew everything until I found the experts HERE; Now I know I dont know SQUAT
www.flybridge.proboards.com
Uncensored, no nonsense boating fun for adults
-
08-04-2023 07:48 AM #1834Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
Re: 1969 Chris Craft Roamer 46 refit
I don't know what's up with that, Bill. I plugged it in, went to the dock and turned on the breakers. Then I climbed aboard and smelled smoke. The "smart" box was black and sizzling on my white non-skid. I turned off the breakers, took it home, cut off the fried box and put it back together as a dumb reverse Y. It works fine, so the problem isn't the dock.
-
Re: 1969 Chris Craft Roamer 46 refit
This is tough to do without opening the tower, but have you measured the voltage for each leg to neutral at the tower? Just wondering out loud here.
Regards
Dan
-
08-06-2023 07:36 PM #1836Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
Re: 1969 Chris Craft Roamer 46 refit
I appreciate the suggestion, Dan, but dock power didn't make the "smart" reverse-Y let the smoke out. The legs are balanced (I probed the shore power cords) and working fine once I cut off the smoked "smart" box and just made a stupid Y.
-
08-20-2023 09:57 AM #1837Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
Re: 1969 Chris Craft Roamer 46 refit
After cutting all of the major panels for the built-in salon settee, I had to make corner pieces to connect them all together. I wanted the same look as the nicely radiused corner pieces I used on the aft stateroom walls. But I didn't have any more 8/4 (~2") solid mahogany that was long enough. So I ended up making identical halves from a 4/4 board and bonded them together with epoxy, then rounded the outsides on my planer, and finished with a sander. They turned out very nice, and you can (hopefully) finally see the shape of the settee base.
1969 Chris Craft Roamer 46 Refit: Remaking the Salon Settee IV
Cheers,
Q
-
08-26-2023 06:26 PM #1838Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
Re: 1969 Chris Craft Roamer 46 refit
When you enter the salon on these boats, one of the first things you see is the settee. And one of the first parts of the settee you can see is a drawer that faces directly toward the salon entry door from the aft deck and aft cabin. I saved all of the original drawers, cabinet doors, etc, and this particular drawer was in rough shape. The varnish was 50+ years old, the solid mahogany front and moldings had cracks, and somebody had spilled blue paint inside. It was a mess. But I got it cleaned up pretty good, and now it has modern soft-close slides. You just have to push it within an inch of being closed and it pulls itself fully closed automatically. It's pretty slick.
1969 Chris Craft Roamer 46 Refit: Remaking the Salon Settee V
Cheers,
Q
Before
After (the camera flash makes the stain appear much redder than in real life)
-
Re: 1969 Chris Craft Roamer 46 refit
I like your corner treatment of the setee. How did you attach the panels to the rabbets? I have a project of building a deck step/box and want to use that joinery.
Thanks
Walt Hoover
-
Re: 1969 Chris Craft Roamer 46 refit
Nice work! Q, where was your Roamer built? Was the Roamer factory always in the same place or was it moved around?