This is Great Thread, Thank You for sharing. I really enjoy clicking from one page to the next and checking out the pictures. Curious, did you already complete the Mechanical and Electrical portion of this build or is that next?
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1,391 to 1,400 of 1855
Thread: 1969 Chris Craft Roamer 46 refit
-
11-05-2019 04:15 PM #1391
Re: 1969 Chris Craft Roamer 46 refit
Scott
1976 43DCFB ,Hull #428, “Exodus”
Long Island, NY
-
-
11-06-2019 09:36 PM #1393Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
Re: 1969 Chris Craft Roamer 46 refit
-
11-06-2019 09:40 PM #1394Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
Re: 1969 Chris Craft Roamer 46 refit
Thanks!
The mechanical stuff isn't 'done done', but it's pretty close to done. LOL
Basically, I need to weld in standpipes for the raw water intakes, then install the strainers and hoses. Fuel lines are in place but I need to do the tank and engine connections. Genset is looking very pretty but not hooked up to anything. Each one is a weekend job, more or less...if everything goes perfectly, which isn't the safe bet on this refit.
Electrical is about the same. The 12v side is all powered up, though there are lots of things I haven't hooked up yet (bilge pumps...that sort of thing). The 220v stuff (drier) is wired, but the 120v side still needs to be secured, boxes and fixtures installed.
-
-
11-07-2019 09:27 PM #1396Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
Re: 1969 Chris Craft Roamer 46 refit
I started building the helm side cabinets recently, before I installed the bulkhead veneer. They're looking pretty good, too!
1969 Chris Craft Roamer 46 Refit: Helm Station Mahogany III
Cheers
Q
-
Re: 1969 Chris Craft Roamer 46 refit
Kudos to you for saving all that wood you took out of the interior. I bet that's the real deal, old Honduras mahogany. I don't think you can buy that anymore, can you?
Cabinet looks great.
-
11-09-2019 06:23 AM #1398Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
Re: 1969 Chris Craft Roamer 46 refit
On the one hand, I'm glad I kept it. The old lumber has been really handy, and it's pretty, too.
On the other hand, for a decade that crap was under foot and otherwise in the way back home in my garage. LOL I'm glad it's finally going away.
-
11-12-2019 08:29 AM #1399Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
Re: 1969 Chris Craft Roamer 46 refit
Speaking of wood piling up underfoot, the mahogany plywood panels were starting to get in the way, so I did some varnishing and installed a few. The aft deck looks sooo much better with them in place.
1969 Chris Craft Roamer 46 Refit: Aft Deck Mahogany Plywood Install I
Cheers,
Q
-
11-14-2019 09:30 AM #1400Senior Member
- Join Date
- Nov 2008
- Posts
- 1,677
Re: 1969 Chris Craft Roamer 46 refit
You know how on big projects, you slave away forever doing the prep work, and everything looks pretty ugly the whole time, and then BAM! It all comes together in a flash and looks great?
The helm station mahogany kinda went like that.
1969 Chris Craft Roamer 46 Refit: Helm Station Mahogany IV
Cheers,
Q