Re: 1969 Chris Craft Roamer 46 refit
I’d put a piece of hose between the pump and distribution tees for strain relief if it was me.just saying I had one of those nylon pump outlets snap off at the threads.
Originally Posted by
q240z
Back on Splash Day in late June 2023, one of the problems I encountered was a very slight leak from the only OEM seacock left on the boat--the one I rebuilt and intended to use for the air conditioner raw water supply. Rather than messing around with it, I replaced it with a Forespar Marelon valve (no more bronze!) and just ran a hose direct to the pump inlet before re-splashing. I left the valve closed for the inaugural trip from Deale, MD to our new home port, but one of my summer priorities was to get the AC system running. I installed a Vetus strainer so the lid is just above the waterline, for easy screen cleaning. Then I flipped the breakers on and turned the thermostat switches to COOL.
Everything worked perfectly!
And now that autumn has arrived, the heat's nice to have aboard, too.
1969 Chris Craft Roamer 46 Refit: Major System Test -- Air Conditioners
Cheers,
Q
"DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN
Endless Summer
1967 50c 12/71n DDA 525hp
ex Miss Betsy
owners:
Howard P. Miller 1967-1974
Richard F Hull 1974-1976
Robert J. & R.Scott Smith 1976-present