Hello all , I am a proud co-owner of a 1982 43' Hatteras in New Zealand and we have just landed a couple 6V92s with 2-1 ratio gearboxes , apparently the originals were 1-5 ??
Any comments would be appreciated !
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 5 of 5
-
12-06-2012 01:32 AM #1Registered Member
- Join Date
- Dec 2012
- Posts
- 1
Correct Gearbox ratio for 43' running 6V92s ?
-
Re: Correct Gearbox ratio for 43' running 6V92s ?
Originals were probably 1.5 to 1, but the 2 to 1 should work fine too. You'll just need to get the right props.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
12-06-2012 12:11 PM #3
Re: Correct Gearbox ratio for 43' running 6V92s ?
Prop size, shaft size and ratio are all connected. You need to look at the package not individual parts.
Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
Re: Correct Gearbox ratio for 43' running 6V92s ?
If you have enough shaft you're probably better off with the 2-1 than 1.5 -1.
CRICKET
1966 HAT50C101
Purchased 1985 12v71Ns
Repowered 1989 with 8v92TI
Repowered 2001 with 3406E
-
12-06-2012 10:02 PM #5Senior Member
- Join Date
- Apr 2008
- Posts
- 2,003
Re: Correct Gearbox ratio for 43' running 6V92s ?
I Have a set of 1.5 to 1 Allision, that were behind 550HP 6-92 with pumps, let me know if that is something that will work for you. in Long Island, NY
JMGLORY Hull # 365
Northport, NY