Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 32
  1. #1

    Wanted: Dodgerboard-small scrap piece

    Does anyone have any OEM dodgerboard that they would like to sell? I hate to order a whole piece from Sams when I only need a few small pieces.

    What I'm looking for is enough to cut out 2 pieces 7"x22" and also 4 small strips 3" wide to make the H-joint for a pull-out gate.
    Sky Cheney
    1985 53EDMY, Hull #CN759, "Rebecca"
    ELYC on White Lake--Montague, MI

  2. #2

    Re: Wanted: Dodgerboard-small scrap piece

    Prob a crazy question, but what is "dodgerboard"?

  3. #3

    Re: Wanted: Dodgerboard-small scrap piece

    Sky,

    I may have some....I'll look as soon as I can get down to the yard. I bought a full piece from Sams and used only about 75% of it.

    Dogerboard is the thin board that runs under handrails near the wing doors.
    Gene
    Former Owner 1974 Hatteras Yachtfish
    Glittering Image

    Hull # 50
    Total Production 1972-1975 Sixty Four

  4. #4

    Re: Wanted: Dodgerboard-small scrap piece

    I need some for the aft corner peices of the flybridge (the curved part). Is this a seperate peice or do can you bend it?

  5. #5

    Re: Wanted: Dodgerboard-small scrap piece

    SKY,

    I just spoke to my guys. They say we have one 2'x2' piece.

    It's really really hard to make a rounded corner with it. For the helm area my guys made a template, glassed over it, sanded and painted it.

    I may have a photo if you'd like to see it.
    Gene
    Former Owner 1974 Hatteras Yachtfish
    Glittering Image

    Hull # 50
    Total Production 1972-1975 Sixty Four

  6. #6

    Re: Wanted: Dodgerboard-small scrap piece

    We have the H joints here in stock @ Sam's Part#13346A

  7. #7

    Re: Wanted: Dodgerboard-small scrap piece

    A pic would be great

  8. #8

    Re: Wanted: Dodgerboard-small scrap piece

    SKY and North,

    This picture was taken as the corners were being fit and before final painting with the color match.

    On a 48'9" YF the aft portion of the helm is covered by a canvas piece running from corner to corner. We replaced that with a large section of dogerboard (appx 2x12, runs under ladder) and then made the moulded fiberglass corners.

    New canvas enclousure is being made this winter.
    Gene
    Former Owner 1974 Hatteras Yachtfish
    Glittering Image

    Hull # 50
    Total Production 1972-1975 Sixty Four

  9. #9

    Re: Wanted: Dodgerboard-small scrap piece

    Quote Originally Posted by jlangley View Post
    We have the H joints here in stock @ Sam's Part#13346A
    Thanks. I noticed them on your parts section, but I think I would rather make them as I can control the width.
    Sky Cheney
    1985 53EDMY, Hull #CN759, "Rebecca"
    ELYC on White Lake--Montague, MI

  10. #10

    Re: Wanted: Dodgerboard-small scrap piece

    Quote Originally Posted by lumina View Post
    SKY,

    I just spoke to my guys. They say we have one 2'x2' piece.

    It's really really hard to make a rounded corner with it. For the helm area my guys made a template, glassed over it, sanded and painted it.

    I may have a photo if you'd like to see it.
    2x2 may work. I'll measure it up again to be sure and I'll send you a PM.

    Thanks
    Sky Cheney
    1985 53EDMY, Hull #CN759, "Rebecca"
    ELYC on White Lake--Montague, MI

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts