I am about to start a total refit of a 1982 Hatteras 46 flybridge high performance model. I am replacing EVERYTHING!!!!! If anyone is looking for any parts please contact me via e-mail (Jon@Rbasales.com). The boat is located in Manteo, NC. The boat is being stripped down on November 8th, and parts will be put in storage. I have a pair of Detroit 8v92TiC 650HP with 300hrs. SMOH, and they run great. All of the stainless rails, bow and flybridge, are in excellent condition. As is the bridge ladder and plexi-glass windshield. All salon windows are being removed and will be available, also all cabinets from the cockpit. I would hate to have to take all of this to the scrap yard, so everything will be let go CHEAP!!!! Obviously there is too much to list, so contact me if you are looking for something specific. Thank You.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 42
Thread: Stripping down a Hatteras 46C
-
Stripping down a Hatteras 46C
Last edited by Good Grief; 11-03-2010 at 04:03 PM.
-
11-03-2010 04:50 PM #2
Re: Stripping down a Hatteras 46C
good grief, list some of the major parts with prices, this may get some more attention. bigbill
-
Re: Stripping down a Hatteras 46C
Hi All,
There are several things I'm looking for.
- two helm door knob & locksets
- 3 fuller brush port holes
- sheets of mozambique teak tiger pattern (veneer over wood is ok)
- some rail ends
Could you please post or PM a few pictures, I know that will remind me of other things I can't recall nowLast edited by lumina; 11-03-2010 at 06:16 PM.
Gene
Former Owner 1974 Hatteras Yachtfish
Glittering Image
Hull # 50
Total Production 1972-1975 Sixty Four
-
11-03-2010 06:28 PM #4
Re: Stripping down a Hatteras 46C
I may be interested in cockpit cabinets and such that would fit on my 41C.
Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
11-03-2010 07:44 PM #5Senior Member
- Join Date
- Apr 2005
- Posts
- 402
Re: Stripping down a Hatteras 46C
Sent you a PM. Thanks
-
Re: Stripping down a Hatteras 46C
How much do you want for the 8v92s?
-
Re: Stripping down a Hatteras 46C
Looking for $29,800 for the pair of 8v92's with allison gears.
-
Re: Stripping down a Hatteras 46C
Sent an e mail earlier.
-
Re: Stripping down a Hatteras 46C
I am interested in interior latches and hardware that would be common with a 36C from the seventies. If you can PM me I can give particulars as to what I am looking for. Thanks, in advance.
-
Re: Stripping down a Hatteras 46C
I am seeking an interior door knob/lock assembly consistent with a 1970's model- not sure if your 80's model used the same type of unit but this could determined through pictures. Thanks,
Cheryl
Cinderella
53MY