-
Bow Pulpit parts - Fiberglass, rub rail, railing, windlass, riser from a '81 70' EDMY
Hello Folks,
I am about to bring this over to Sailorman in Ft. Lauderdale and wanted the inner circle to get first dibs on the purchase. If you have an interest in replacing or adding a bow pulpit, to your Hat, let me know.
I also have a 32v Plath Windlass that has been completely stripped and repainted like new.
Items included:
- Fiberglass pulpit (without the teak on top)
- Bow Rail to the first join on the port and starboard side and over the pulpit (including 4 stanchions)
- Rub Rail for entire pulpit and port and starboard bow
- Riser box for windlass
- 32V Plath Windlass with chrome capstan and friction wheel (professional new paint)
- Bruce Anchor (fair condition)
- 200 Feet of galvanized (fair condition)
Please Note:
- Anchor roller/chute and safety are NOT included.
- The windlass pictures are from prior to the refinishing and the windlass will likely be sold separately.
- Prefer to sell together
- All of it is over at Cable Marine West, pickup preferred.
- Detailed pictures available, just not allowed to post here yet as I am too new
Regards,
Ryan
-
Re: Bow Pulpit parts - Fiberglass, rub rail, railing, windlass, riser from a '81 70'
PM sent for the windlass....
-
Re: Bow Pulpit parts - Fiberglass, rub rail, railing, windlass, riser from a '81 70'
Thanks JD, that was fast! :) Replying with more info.
-
2 Attachment(s)
Re: Bow Pulpit parts - Fiberglass, rub rail, railing, windlass, riser from a '81 70'
Pictures of the refinished windlass.
Her Gypsy is G4 3/8"
Attachment 54608Attachment 54609
-
Re: Bow Pulpit parts - Fiberglass, rub rail, railing, windlass, riser from a '81 70'
Any chance you have the flagstaff and bow rail fittings?
-
Re: Bow Pulpit parts - Fiberglass, rub rail, railing, windlass, riser from a '81 70'
PM sent. I spoke for the winch on FB. Sent you my number and did not hear back. Is this winch still available? If so, please call me or send me your number. Thanks. David Cate
-
Re: Bow Pulpit parts - Fiberglass, rub rail, railing, windlass, riser from a '81 70'
Also, while you are at it, what is the status and price for the bow pulpit set up?
DAN
-
1 Attachment(s)
Re: Bow Pulpit parts - Fiberglass, rub rail, railing, windlass, riser from a '81 70'
Hello all!
Well it has been a bit since this post. I left Florida during a good weather window in July and carried the Plath 32V windlass with me. She has served well and is ready for her new owner.
If anyone is still in the market for replacing their windlass. This freshly refinished Plath can be yours!
Attachment 66990
1,500
pickup in Washington DC
Ryan
-
Re: Bow Pulpit parts - Fiberglass, rub rail, railing, windlass, riser from a '81 70'
Quote:
Originally Posted by
Dontburntheday
Hello all!
Well it has been a bit since this post. I left Florida during a good weather window in July and carried the Plath 32V windlass with me. She has served well and is ready for her new owner.
If anyone is still in the market for replacing their windlass. This freshly refinished Plath can be yours!
Attachment 66990
1,500
pickup in Washington DC
Ryan
Ryan -
PM sent. Sorry we didn't connect on this before.
-
Re: Bow Pulpit parts - Fiberglass, rub rail, railing, windlass, riser from a '81 70'
Ryan -
Sent you a few PM's.. following up on that windlass once again. I'm interested.