Printable View
My salon door lock/handle mechanism has been a little flakey lately. Took it to a locksmith and he says it's toast. Anyone happen to know where I may come across one new or used? I already sent message to sams so maybe they have it and this question is answered. Any ideas on a part number or where I may find one of these?
I am curious as to which model of lockset you are looking at as I have a couple that I am wondering about myself.
Could you post a photo?
Thanks,
Nick
I just ordered a Merit Metal mortise lock set from Fisheries Supply. Fisheries Supply do not list the correct model on their web site and Merit Metal does not list any marine products on their web site, but they do supply it. I called Merit Metal and they said I needed a left hand reverse lock set and that is what I ordered through Fisheries Supply. It was about $30 cheaper than what they have listed.
https://www.fisheriessupply.com/meri...or-latch-3474t
I have not received it yet. I have read some comments that it is the original configuration for my 43DC. Whatever it is, I will make it work prior to refinishing the door.
If the lockset looks like the one pictured in the link from Jammin's post, I can tell you that I have recently replaced broken springs in that style lockset with springs I got from Sam's. They now work fine. (The springs I received looked a little different than the springs I found in the locksets, but they worked well.)
Nick
Look under locks in Sam’s catalogs. Here are two of the many they have.
Thanks guys, I think this is the one
http://parts.samsmarine.com/PartSear...emNmbr=S84057A
But it does not show the lock mechanism in the image (where the key slides into to open/close the deadbolt).
You guys think it is just missing in the pic or is not included in the set?
All;
Our Galley to Companion way latch was recently getting "hinky", and simple disassembly, cleaning, and generous lubrication of each sleeve and part prior to reassembly completely renewed it.
Same with our Salon/Pilot house door latches.. They could stand to be re-plated sometime soon, but when I renewed the doors complete with a new teak panel and paint/varnish as necessary, they're like new again.
Let 3-in-1 oil be your friend I guess, is my offering here.
Attachment 37282
Cheers Everyone-
Chuck
Yeah, I wish that were an option, really do. The entire lockset tumbler came out with the key. Pins and springs flew everywhere. No warning, no stickyness beforehand.... The extra bad part was that the boat was dead bolted at the time. Luckily one of the salon windows was open. Crawled in trough the window but the inner deadbolt was non-operable.Quote:
Originally Posted by chuckbullett@gmail.com
Called a locksmith out, nothing he could do.
We had to use an air body saw to cut the deadbolt to gain access to the boat. What a nightmare!
Got a temp lock in for now while I work to source the replacement.
Just to update this thread, ended up working with the crew at sams to make sure I got the right part, it arrived and installed Friday night. Nice and Shiney!! woooo!!!
Send us a photo.Quote:
Originally Posted by rustybucket