I'm fairly new to Galley Maid heads.
After not using the head for about a month, the bowl filled but wouldn't drain when flushed. The pump motor sounded normal. I checked the ball valve to the tank and it was open.
What should I look for?
Printable View
I'm fairly new to Galley Maid heads.
After not using the head for about a month, the bowl filled but wouldn't drain when flushed. The pump motor sounded normal. I checked the ball valve to the tank and it was open.
What should I look for?
Try using a plunger to force the water through the system. Once it fills up it should work. If not you may have to change out your stators.
Go to http://razmarinepumps.com/ Read the trouble shooting sections, look at the videos, and buy your spare parts from them. You will be an expert in no time at all.
This forum is great! Thanks. It makes the learning curve much shorter and less painful.
I learned before about not clogging the head when I tried to flush a paper towel. It did NOT like it; fortunately, after about 3 days, the paper towel got soggy enough it finally, grudgingly, went through.
Single Ply only!! I've tried RV toilet paper and it's almost too thin but the scotts single ply seems to be a good happy medium.
Loosen up the priming plug on the big end of the pump until water comes out. Tighten back up and you will be good to go. As mentioned if this happens regularly you may need to purchase a new stator, although I may disagree about the source of that part. Little frustrated at the moment...
Not sure how many Hatteras owners are aware that The Galley Maid Co. is still in business , operated by the original owners son, great support and service and parts for our systems
Galley Maid
Okeechobee Fl
863 467 6070