single round ss handles for shower and lav for my 1998 43'Conv
Does anyone know how to remove the handle from my shower? There is no hex head set screw whatsoever......only possible way I can determine is to pry off the ss round cover plate, however, I don't want to damage it if that's not the case. I have no hot water , and need to repair/replace the cartridge.
Also, is the freshwater pickup tube going to be located within the area of the hoses next to my manual gauge? I lose prime at 3/4 full water tank, and suspect deteriorated pickup tube!
thanks for any help you can provide.
Re: single round ss handles for shower and lav for my 1998 43'Conv
A photo or two will help.
3 Attachment(s)
Re: single round ss handles for shower and lav for my 1998 43'Conv
Re: single round ss handles for shower and lav for my 1998 43'Conv
If I was going to guess I'd say pry off the cap on the top and you'll probably find a screw under there. But it's only a guess.
Re: single round ss handles for shower and lav for my 1998 43'Conv
Mos def'. Skinny blade to pry off the cap. Make sure water pressure is down before experimenting.
Re: single round ss handles for shower and lav for my 1998 43'Conv
Not sure what you mean by "lose prime" but typically a deteriorated pick up tube will cause extreme wet farts at faucet and shower head. There is usually just one pick up tube per water tank and is right around the access hatch. Try suck and blow at the hose/tube ends to see what the critical path is.
Re: single round ss handles for shower and lav for my 1998 43'Conv
Thanks Rd & Avenger, I will get to the boat tmr, and let you know, thanks again.
Re: single round ss handles for shower and lav for my 1998 43'Conv
Quote:
Originally Posted by
Avenger
If I was going to guess I'd say pry off the cap on the top and you'll probably find a screw under there. But it's only a guess.
You are exactly right.
Re: single round ss handles for shower and lav for my 1998 43'Conv
If the cap does not pry off, look very carefully at the back of the base of the handle for a little slot that you have to stick a tiny flat blade screw driver into and push to release a spring loaded nub to release the handle. If it is that typ the slot is very hard to see, use a bright flashlight. John
Re: single round ss handles for shower and lav for my 1998 43'Conv
great thanks John & Seven