1 Attachment(s)
ID Oring size/# for Perko Sea Strainer
Attachment 31051
Trying to ID what oring/gasket I need to purchase to replace the ones where you open the top to take the basket out. It seems like they are 3" on the inside and 4" on the outside. Brass nipple that goes from my seacock to my strainer is 2.5"
Please help, and thanks in advance!
Re: ID Oring size/# for Perko Sea Strainer
Quote:
Originally Posted by
dirtyboat
Attachment 31051
Trying to ID what oring/gasket I need to purchase to replace the ones where you open the top to take the basket out. It seems like they are 3" on the inside and 4" on the outside. Brass nipple that goes from my seacock to my strainer is 2.5"
Please help, and thanks in advance!
The model number of the strainer is stamped on top of the body. That should help you find what you need.
Re: ID Oring size/# for Perko Sea Strainer
Quote:
Originally Posted by
racclarkson@gmail.com
The model number of the strainer is stamped on top of the body. That should help you find what you need.
They’re old and I can only make our 493 or 498. Any ideas?
Re: ID Oring size/# for Perko Sea Strainer
If its the seal for the lid, just cut your own seal out of cork or rubber gasket material.