24v stair / step lighting

I have 12 or so original 24v step lights if anyone needs any.

These are the metal fixtures that install into the plastic single gang boxes in the stair risers with screw in bulbs, and I have the stainless louvered trim plates as well.Attachment 59770

What did you replace them with?

Quote:

---

Originally Posted by SKYCHENEY

What did you replace them with?

---

24V LED black lights with similar louvered trim plates, from amazon.

https://smile.amazon.com/dp/B08BTJ55...t_details&th=1

Attachment 59771

Those look almost identical to the originals. Thank you for the link.

Quote:

---

Originally Posted by SKYCHENEY

Those look almost identical to the originals. Thank you for the link.

---

you're welcome.

here's a picture of them installed and on, during the day, on the water, mostly sunny.

Attachment 59803

I wonder about the spec; 12 to 24V. I'm assuming AC or DC volt.
A ACv transformer is mentioned in the ad.
What happens when the alternator or charger puts out 28+ DCv?

Quote from the ad;
Must be powered by 12-24V low voltage transformer (not included).
This means AVc..

Quote:

---

Originally Posted by Captain Ralph

I wonder about the spec; 12 to 24V. I'm assuming AC or DC volt.
A ACv transformer is mentioned in the ad.
What happens when the alternator or charger puts out 28+ DCv?

Quote from the ad;
Must be powered by 12-24V low voltage transformer (not included).
This means AVc..

---

That is the current running experiment... they have been on for about 5 days, no issues yet.

Will let you know if any of them burn out.

Quote:

---

Originally Posted by Bayard

That is the current running experiment... they have been on for about 5 days, no issues yet.

Will let you know if any of them burn out.

---

The lights have now been on for over a week, continuously, and are all doing fine.... so far.