Is anyone familiar with the construction and performance of a 1993 46C What is the story on the 46's that were bulit between 92-94? Are they more akin to the 45 that Hatt had been building at that time or closer to the older 46 hull from the early 80's, late 70's. Any help would be...

I am interested in upgrading my fuel system and have been looking at the Racor vs Separ vs Fleetguard systems. A place that rebuilds DD's told me yesterday to disregard the Separ system because if it fills with water, water bypasses the filter and then heads toward the engines blowing tips off...

recently purchased 1979 43 sportfish hatteras. it seems a previous owner has converted holding tank into a 3rd fuel tank, i am trying to decide whether to change back, or install new holding tank....thoughts? can anyone tell me what the capacity of this tank would be, save me some math if anyone...

was the standard shaft size for this year 1.75: for diesel? with a 1/5 to 1 gear or was a 2" shaft also availible? if so did the strutts fit both size shaft bearings? are the shaft logs large enough to accomodate a 2" shaft even if the struts are too small.

Okay, so I've got a '78 53 MY. Please, someone tell me where this darn thing is and how I can access it?

Turns out I became the wrench having to re-install my main sea water impellers removed for winterizing. I have read some pretty dreadful reviews of the difficulty of that task! But these impellers were the newer design with more fins and thinner cross-section. So I proceeded to coat an impeller...

Pardon the non-boating question, but since there are more than a few professionals, including at least one doctor, aboard the site, I'd like to pick your collective erudite brains briefly. My wife and I run a fairly new - open 6 mos - independent pharmacy here in CT. Now that our fax number is...

Went out in the boat this weekend and for the second time after running for a bit an odor from the holding tank made its way into the boat. I do not have leak, and everything is new incluing hoses and all fittings. When the boat is in the slip, there is not any smell, but after running and...

Have had our Hatt for 6 yrs now (actually as of today, June 1,2000) and have a question on how ya'll take care of your swim platform. I have in the past tried using varnish, then sanded that off and went with teak oil, then 2 years ago just use teak cleaner and brightener on it every 6 months...

I need a replacement in line oil cooler for an 8V 71, left side it is 19 in. long has 2in. hose connections 1/2 in. pipe oil thread. Can anyone help with a supplier ? Stewart