I have lost the piece of paper that had the # for the Secondary filters on my 8v92s. They are the drop in type. Do any of yall know the number for the filters. The boat is in Ft. Lauderdale adn I can not get the number untill I get there. I need to purchase filters to take with me. Please help...

Got to the boat tonight and found that ever so lovely stink of battery in the stb engine room. Batteries were hot about 110-120 degrees , charger was hot and running,batts are very low on water. Charger is a relatively new Pro Mariner 32v/220 v input. shut down charger and watered batts ,each took...

I am trying to remove my GMaid windlas, got all the capsans off plus 1 c clip.6 nuts underneath. Tryed to tap out a bushing around main 1 1/2 in. shaft from above but gearbok did not move. now shaft will not turn. Galley Maid teck said to pound it out using a length of pipe but Im not sure what...

Had a very close call on Passages today. Was checking operation of the turbo on my 6-71ti this afternoon. With the air cleaner off, I pushed the throttle to 2100 rpm and went to shine my light down the throat the check for oil leaks. The damn thing sucked my hand and flashlight right into the...

Greetings all. Of all the things I've lost, its my mind I miss the most. Second is the 9 1/2" by 9 1/2" metal ac grill / vent from my forward stateroom. How did I lose it? I don't know... Does anyone have an old or spare one? I checked with SAMS and they don't have them. The Home depots,...

Hi there, I re-engined my 46 C with GM 550hp 92s instead of 435hp 71s and although I have no vibration with the old props, it seems I have a vibration with the new right prop which is a 4 blade 30/36, as prescribed bu both Michigan and props and a local manufacturer. Any ideas why? I would...

GRAND HAVEN MICH. TO NEW YORK-----CAN SOMEONE GIVE ME SOME IDEA OF HOW MANY DAYS IT WOULD TAKE. tHE BOAT WILL CRUISE AT 22 KNOTS.

Well, I made it back home from the land of sweat and squalor-- 3 weeks of living on a " sinker " in NOLA and then a week at home in Chicago is a blessing, but its' 90 here too !!! Great news tho; it took me 45 minutes to close-open and close at least 11 sea-cocks. Bar far the worst was the center...

Hello All The decks on my 61' motor yacht need to be repainted the non skid texture is fine but the paint is faded and stained in spots. How can a surface like this be prepared for painting if I sand I will sand the non skid right out. I really don't want to sand the non skid out and re do it...

Re: thread of guy with dock wheel marks. Didn't know Goof Off can be used to remove hull marks. Would like to hear more from anyone with experience. Thanks, Capt'n Bill