There have been a few threads about 110v vs 32V pumps, and how they might be tied together. Wellll....I had my camera at the boat this weekend and took a pic of my plumbers nightmare. I have both varieties, plumbed together with a Y valve so one can die or be removed for surgery without losing the...

I am going to install flowscan meters on my 671n engines. I will have to install senders @ intake & return line. When I do this I will lose my prime. A few times I have run low on fuel or when changing my fuel filters I lose my prime and it is a PITA to restart. Is there a priming pump I can...

I want to have my heat exchangers serviced this spring, and I haven't done it myself before. First off, I need a source for the gaskets. Secondly, I could use a basic set of instructions on how to remove the cooler from the housing. Thanks.

So I'm pretty much back together on the port main....need to fill it with the 12 to 15 gallons of the DD pink stuff (sorry forgot the name) and was just wondering about all these pet cocks high up on the engine and turbos. Is there some metod to burb these? Do you just fill it, start, let the...

I had to replace a TV in my salon and went with a new LCD HDTV (Sylvania 32). Great set. But what the big surprise to me was how amazing the reception was on all the digital broadcast channels. I've just got a regular 14" flat dish VHF/UHF antenna mounted up on my half-tower hardtop, and it used...

I've been struggling on and off this winter to restore salt water flow to my aft toilet. It's a Raritan Crown Deluxe. I suspected all along that eel grass from a stay in Nantucket last summer was the culprit...While anchored there, I removed the spring and ball valve from the intake, at the pump...

I'm struggline with two dink motors and an old beast of a pontoon....yes, my cylinder index is way to high..... Is there a forum out there, like this one, or BoatDiesel that has a decent knowledge base? I've done some searching, but not with much luck. Thanks,

I recently installed a Vacu-flush toilet system in my boat. It was fairly easy to install and it work very well. The last item on my list to finish this job off is to de commission the seacock that suppiled the old salt water fed toilet. My question is how do I do this properly? Thanks

I plan on climbing back up on the tower this weekend and wanted to make sure the advice I received on another forum makes sense. It seems like a good idea but I'm not sure it will work (see below). I have two unused wires already run from my helm to my tower and this sounds like a plan: Try...

Pulled the shafts and back cutlass bearings on my 1973 43 dc. Took four hours the first side, Four hrs. to get the cotter key out of the other side, what a pita.. Packings look to be maybe 3/16 anybody know what they really are? I want to use gortex. This all started as I wanted to replace the...