I need to replace the lines from the sea water strainers to the engines. The old hoses and fittings are 2 7/8" ID. I have plenty of 3" ID water/exhaust hose already on hand. Do you think it will be an issue to use 1/8" larger hose in this particular case?

Everting on my left side breaker panel on the 50a is out. I’ve checked fuses and switches, unless I’m missing something dumb… only culprit left is the double 50a for that side, right? I don’t think those went bad without knowing they are bad? (Ie tripping off).I ordered a new one, but what else do...

ONAN 8kw not starting on 81 43C! When you push start button clicks and trips breaker (on /off red switch). Originally thought it was bad fuel solenoid as we were able to bypass and hold fuel lever. Problem still persisted after installing new solenoid. Checked start solenoid (disconnected and...

Underway yesterday en route to boatyard for bottom paint and engine seaflange replacement. Everything was going well until one hour into the trip. I noticed that the heading vector on all Garmin displays was indicating 10-15 degrees right of course. My disassociated Tablet displayed a matched-up...

Hello everyone, I currently do no use my dishwasher, use it for storage. I noticed water on the galley floor and saw it dripping from the dishwasher. I opened the door to notice it was full of water. Garbage disposal is not an issue, no clog, seems to be working ok, help!