Our 48 LRC has what I believe is the standard steering station overhead wood cabinet for mounting electronics. It starts from the overhead white vinyl, and drops down at a forward angle, then takes another turn toward the windshield and next heads back to the overhead in a single panel. The second...

So old and never maintained, filled with numerous cracks along the grains. I assume this is too far gone to be saved, or, can the cracks be filled with some material before a MAJOR varnish job starts?

Has anyone had experience changing the output oil seal on a M-series Allison in the water?????

Can anyone tell me what WOT stands for?

I have a Fireboy-Xintex (Manual/Automatic with FE241 clean agent) system installed in my Generator room and was wondering what life expectancy one would expect for this system under normal conditons. Has anyone had it disharge slowly over time or is it good for a number years? How often has...

Yeah, well, during the last windstorm the flybridge canopy came craching down and busted the Stbd side if the screen. Any ideas where to get a replacement? SF Bay Area...?

Has anyone ever effectively used solar vents retrofitted into their hatches to help prevent dampness in the cabin areas? Any other recommendations to reduce moisture during the regular season to promote airflow? Problem mainly occurs during Spring and Fall as there seem to be larger temperature...

Hello: Does anyone know the proper specification for the bell housing on 6V-92TA engines with Allison M20 gears? Is it "SAE #1" for example. If changing to Twin Disc gears (dry flywheel versus wet) can you use the existing bell housing? Any information or source for info. would be...

I have to replace my masthead and all-around light which is currently a 12v combo. This will be the second replacement of that Perko fixture, and I don't want to put what's up there back up there. So, if I'm going to replace that, I'd like to replace all of my nav lights with the bigger ones that...