We just bought a 1970 53 CMY! Formerly “Salty Bear” out of Port Charlotte. Now residing in Ft Myers Beach re-christened “Rockin the Doc”! We already have a big to do list and trying to prioritize systems. The general condition is very good. She dosnt look her age and so far every system I dig into...

I need help in determining what kind of an amplifier I need: I have a sony marine stereo, 4x52W, connected to a speaker selector, which can run the deck speakers (2 150W 4 ohm), bow (2 100 W 6 ohm) or swim platform speakers (2 150W 6 ohm) in any combination I like. I only run one area at a...

Anyone have a source for a new or used "AC" trans pressure gauge. I'm sick of having to bang it to have it read correctly. Sams says they're no longer available. Thanks.

I know we've done this to death and that I have asked some of the questions myself but I have several more: Did the Atlantes head fit with no additional holes being made to the bulkhead for the hoses? I assume that the oem GM pump is no longer used and that the output of the master toilet...

While we were here in Mobile I bumped the rubber vent that is at floor level and I removed and fixed it.On Sat after we made a short run on the river I saw that the port vent cover was missing.Looks like someone just walked by and jerked it off .All of the screws were intact but the cover is...

Is there any sort of pressure switch that will allow the high/low cutoff/on to be somewhat closer? The standard switches I have used are essentially 20PSI apart. You can shift the entire range - go from say 20/40 to 30/50 - but you can't change it to 30/40. I would like to get it closer; any way...

I have purchased a new to me extended 61' Hatteras. Does anyone know of a specialist that could teach me the boat from stem to stern? The seller (very nice person) was supposed to take me through the yacht but has not had time (family issues out of town) and I am wanting to get it done. I have...

any body ever cut/drill the floor or deck of a whaler. we have one at work that has a soft spot in the deck, is it cored like a hatteras, deck-coring-another layer of glass? what type of coring material? does it rely on the foam for support? i need some info before advising them how to fix it.

My 13"x24" port lights are pretty much toast. 2 of the dogs are broken and whatever that finish is on them is cracking off. I am not crazy about them to begin with and am even less so now that I know they cost 1700 bucks ea to replace. Anyone have an alternative? New Found Metals has some...