I hate creaky floors; they irritate me. I had such an irritant in Aslan's salon entryway from the cockpit. Aslan is mostly carpeted with OEM 3/4" plywood subfloors. I'm pretty sure Hatteras never expected their stuff to still be alive and thriving well into the 21st. century. If they had,...

I haven't got around to installing the new Kohler genset yet.. but it looks great on the trailer. The boat has been at UT stadium for the last 2 month, and running on the OhNo. Sunday, the Bosch Axxis dryer wouldn't run, and no dispay.. just dead. The washer, which plugs into the dryer, works fine,...

Engines started normally, pumped out and added fuel and went to start engines. STBD engine wouldn't start, but starter relay on wall clicked, but starter solenoid did not. After looking at it for 5 minutes, I decided to manually start it by connecting the starter solenoid (on starter) to power, and...

My 86 43DC is coming alone nicely. The project now is to remove the full wall mirrors in the salon because the silver backing is peeling. Doesn't appear to be made for removal. Any ideas short of tape and a hammer??

I had the same muse for this question as MikeP did. While pulling out every line I had out to secure the boat for Irene, I came across a spare that came with the boat. It was ¾” nylon 3 strand with a 2+ foot eye splice that I used as a spring line. I noticed the line laid across the boat...

Decided to replace the gauges, senders, and alarm annunciators. Anyone got recommendations? Mine don't report much of anything accurately and the alarm panel races are cracked in places setting off false alarms. The wires from the engine room seem to be okay, so was hoping not to have to pull...

Gents, I’ll figure this one out, but one if you have seen this before. I’ve got a Raycor 1000 fuel filter set for each engine. As you know each set contains 2 filters. I changed all fuel filters today but when zipping it all back up I was testing the filters individually instead of “all on”...