The Northstar6100i unit on the bridge of my 74 is not powering on properly. It is the slave unit to the one in my pilothouse and I use it primarily as the radar display on my bridge. I also use it to control my pilot on the bridge but that can easily be changed to use the newer Garmin I have on the...

I'm hoping someone has corrected this problem in the past. I have a 53" MY and in the last 10 months have seen the walk ways on both sides of the boat back up and overflow into the cabin over the two side doors. I know we have had some big rain days, but this has only happened three times in 10...

I am replacing the OEM salon lights (110v and 12v combo) with a stand-alone 12v light and 110v track-lighting. Question is: Does anyone know of a good source for a 110v small profile toggle switch made for the marine environment? I have sourced a toggle switch from Lowes but is has open...

I am looking to convert my green timed Allen Bradley switch to the silver push button for my VIP head. I bought the plate and the silver switch from Raz. Unfortunately, the plate with the green switch also has two red lights (sump and holding tank) as well as the silver pull for the sump. I assume...

I was wondering if anyone knew of a quick tool or easy solution for sighting in a satellite tv dish to acquire signal? I currently have a dish mounted on my vessel for while in the marina. I was looking into getting a Tracvision system then I saw the price tag. So, now I'm back to keeping my...

I have a granite (or composite) table top on a high/low pedestal on our aft deck. It is grossly over-sized for the area. We are looking to replace it with a granite coffee table sized top that when can the attach to the high low pedestal. My guess is something about 24" x 36" or so. I have found a...

I picked up a new fresh water pump today from Atlantic DDA, and was surprised to see that it come with the face cover off. Does anybody know if it needs to be off in order to install the pump on the engine? I'd much rather put the plate in place on my work bench than cramped in my bilge.

In the process of refitting the interior and was planning on having Scott supply and install a Garmin Suite when the majority of the woodwork is finished. The plan is for a new radar, transducers, a digital spine for monitoring engine gauges and alarms, (my original panel is fried), display...

It is my life dream to purchase a live-aboard offshore boat near my family (Port Aransas, TX) to take myself (and my children) into retirement. Having grown up on the water, I am certain it is something I want my kids to experience. After speaking with my wife, we have settled on 2 different...