I am new owner of an '84 53' ED and when I get close to filling my fresh water tank my aft cabin head starts to fill from the top. Any ideas as to why that may be happening and how I can stop it?

I need to replace my temp sender switch that feeds the alarm panel. I have the 4 function panel. 8v71ti what temp rating should it be, current one is corroded and painted. Thanks, John

I need to buy a Pod to mount my Furuno MFD. It looks like Seaview Power Pod and NavPod are the major choices. I see that NavPod has released the Gen3, but their website isn't working at this time. Does anyone have experience with either of these? If so, I'd appreciate your recommendations.

Could have used this a few days ago when cutting down some threaded rod: http://altdriver.com/story/the-tool-that-fixes-damaged-bolt-threads/?utm_campaign=trueAnthem%3A+Trending+Content&utm_content=583541f904d301322130ed1d&utm_medium=trueAnthem&utm_source=facebook

My boat is on the hard in the final stages of a paint job and being put back together. I will soon be ready to hit the water and need to have my stabilizers serviced. Aqua Yacht Harbor, who is doing the work, says they can do the service but don't have the tool to remove the fins. I have contacted...

I talked to 2 friends with Detroits with Allison transmissions and both of them said they solved their creeping problems by going to 30 weight oil. My mechanic said the Allison's will run just fine on 40, 30 or even ATF if need be. Have any of you experienced creeping and found it went away with 30...

There's a small 24vdc?overhead Light just as you come In the salon of the boat I've been trying to figure why it doesn't work And wheres the ....... switch?I traced the wire a two gang switch box Behind the A/C , D/C panels. Written on the top of the box was E L R? ThanksSeahorse52' SF