Good afternoon. I was wondering if anyone has used step-up transformers to change voltage for specific uses. In this case, it's to provide higher amps/voltage to maintain charge levels for iPads used for navigation. My boat was a 24-volt boat and I had to use a step-down transformer to replace a...

I have a reach problem with my davit, in the picture below is shown how low I would have to set the sling in order to be able to lift high enough. This will increase tension on the sling / and lift points quite a bit. Just wondering if anyone has connected with a sling set this low. I don't know...

I have Raritan heads and on my 53 the mid stateroom lines seems to be plugged. I disconnected the unit from the discharge line and ran a hand snake down the line. I was able to get about 16 ft down the line and hit a stop. I don't know if I am hitting an obstruction or is there a possibility...

Hi all, I recently acquired a 1996 Cockpit MY. I'd like to start researching overhauling the original equipment at the helm. I come from a 32 Chris Craft Crowne where I have a simple Garmin chart plotter. I have no idea where to start. From a usage perspective, she is ported in Muskegon and...

Has anyone had to change out the forward holding tank vent hose on a 53’ HATTERAS? If so can you tell me how to get to it. I want to ad a charcoal filter as well. Once it leaves the tank I can’t see where it goes or how to get to it.

We talked about this some in another thread. I thought it might be a good idea to start a new thread on this as it might become a long term project that could apply to many parts. So anyways I got the sample part from Proto labs so that I could see how the surface finish turned out. As expected...

Well, I've searched the site finding very little on ZF gears. I'm wondering how many Hats are equipped with ZF transmissions? Looks like about all of the posts are Allison related. Maybe that's a good sign--for me, at least. Anyway, I have a pair of ZF BW250 1.511:1, and they run just fine...