Given the upcoming storm on the east coast, just wondering if there are any recommendations or resources for secure line placement for those of us who keep their boats in the water. On a similar subject, any experience with the piling mounted systems that compensate for tide changes? Thank you. ...

I seem to have a DC grounding issue on SB engine. Looked at my wiring diagram from Sam's not a great view from a grainy fax scanned wire detail. Have checked all grounding wiring going to battery could it be the battery cut off switch my go to guy is at least 3 months from even stopping by he is...

On my boat, the Glendinning synchronizer works well, but the only switch to engage/disengage it is on the flybridge. Is that standard? Or maybe the PO added it later and didn't bother with a switch at the helm. Can I simply wire a second switch in parallel at the helm?

Could someone please post the name of the folks who rebuild these? I can't seem to find it.

https://youtu.be/WijYh9MA14c

Good Morning All: Being on the backside of winter, here in MD, I'm thinking about the projects I'd like to complete this spring. Although I have nary a complaint about my 52 Convertible, I hate the placement of the Raw water intakes. Their location makes winterizing much more difficult than it...

I would like to install new LED lights in my radar arch. The imtra lights I selected are a 1/4 inch larger than the previous so the cut outs will need to be widened. Any thoughts about how best to expand the diameter in the aluminium arch? My first thought was a deburring bit on my drill. ...

When I drove the boat the first time, we opened it up WOT and got on plane relatively quickly, and were doing 19 knots. I felt it set down and drive differently. The second attempt, later in the trip didn't quite make it on plane, and we were doing 17 knots. I did use trim tabs both times. What is...