I am replacing a 32v livewell pump with a 12v. The wiring from the breaker box to a junction box by the old pump has a (+) , a(-), and a ground. I have a 12v bank that I ran a + and - from to the existing wiring at the 32v panel. I get 12v readings at the pump but it won't power up. I've...

Has anyone converted the canister for transmission filter to a spin on? Tired of gasket leaks, if so what did you use. 892’s in a 52c. Thanks

I'm removing about 3,000 pounds from the boat, repowering from 2100 lbs Detroits to 1200 lbs Yanmars. Also removed all the interior wood floor and the frame will be replaced with aluminum, back wall removed (wood) will be replaced with PVC also removed A LOT of wood on the interior. How much do...

Goooddayz all, The Netherlands here, Since I’m on the verge of buying a 1980’s 53’MY and steel boats are the standard in Holland and steel is the material am familiair with, I’d like to learn a bit about osmosis on Hatteras 53 MY’s. -Is there any? -Do some years of built have more osmosis than...

So I have owned my '72 43' DCFB, since 1997. Still have the original shore power cables, which have not let me down. However, the PO must have docked where there was creosote, etc., since these cables are tarred looking, dirty and black streaks. I have tried various means to clean them with...

In the process of refitting the interior and was planning on having Scott supply and install a Garmin Suite when the majority of the woodwork is finished. The plan is for a new radar, transducers, a digital spine for monitoring engine gauges and alarms, (my original panel is fried), display...

1965 Hatteras 41 DC. insured with BoatUS for over 12 years. I switch insurance to liability Oct-May, and May-Sept, I have hull coverage. Called them today to switch the insurance from liability to hull coverage. No dice. They are requiring me to have a SAMS/ NAMS survey. argh. Please...

So, the time has come. We are getting her painted this year - hopefully going in the booth (for prep work) in the next week or so. I am sure I will have a ton of questions .. but to start - Paint brand recommendations? And are all Hatteras's originally Hatteras Off White?

We are beginning the install of a pile of underwater lights and 1 camera in the next week or so. One of my buddies made the comment that I should put a camera pointed at each prop. While that sounds like a great idea, to be able to check out the props for debris, lines...etc sounds like a great...