Morning everyone, Hope someone can tell me what special tool you can use or what size socket is required to remove these fuel senders Looks like i can get a couple off with a pipe wrench , but the cockpit and midships there is no room to get a pipe wrench in there. The one in the cockpit...

Had turbos rebuilt 2 years ago. Looks like the stainless riser sprung a leak. It’s now fused / rusted to the manifold. I need to get it off and new one made. I’ve beat on it with hammer. Used small chisle used pb blaster and it’s stuck solid. How would you go about getting it off. Turbo was...

Morning, Hope you don't mind another noobie question(s) I have the 8v92's and was going to change the oils etc. Question I have, what is the part number for that 2ndary fuel filter that is in the canister. Found the part number for; Detroit Diesel oil filter 23530408 - napa says it's 1671...

Hi All, have 3 vacuflush toilets plumbed into a center line holding tank. Appox 85 gals give or take. Just realized yesterday that the red lights in the heads are not working . they are supposed to warn on 3/4 tank full. Question is, how do I test the sender unit on the tank. Looks to be a 1/4...

Capt Tom, Flyin' Finn - In the process of replacing 5 blade Rolla propellors working with Precision Propellor. Looking for any feedback from those that have been down this road. Any help is appreciated.

I have a 1968 41C. Would appreciate any help. I can't seam to locate a very slow leak in the very bottom of the forward bilge area. There is a very thick translucent layer of resin "see pic" running from the very front of the boat, accessible through the forward berth floor hatch, that runs...