PDA

View Full Version : V-Berth window frames on '72, 36 Hatteras



aah924
05-31-2004, 08:00 PM
I have just realized that my v-berth window frames are broken & leaking. Does anyone know where to get these? Is this a difficult replacement?

Thanks,


Allen

joe31hat
06-01-2004, 12:40 AM
Check the 'FULLER BRUSH website, they still carry the original parts.

hATTISFACTION
06-01-2004, 12:14 PM
I just did this job on my 1976 42 Hatteras. Fuller Marine Division will sell you exact replacments if they are Fuller Ports.I found an easy way to remove the old port is to make a cut through the inside frame right across the bottom with a Dremel Tool. Then you can pry up one edge and gradually release the bedding all the way around the frame without too much trouble. If the face trim is in good shape you can leave it alone on the hull and put the new port in with new bedding and you will be all set for many years.