Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Results 1 to 10 of 28

Hybrid View

  1. #1

    Underwater lights (cost effective)

    Those LED lights are great. Low power etc.. But geeze they'll soak ya. Has anyone seen anything reasonable that will mount in the SIDE of the hull as well as the transom?
    Halogen is ok I suppose. I was looking at the UWBR-HAL line.
    Regards
    Dan

  2. #2

    Re: Underwater lights (cost effective)

    We bought 3 very nice LED lights for underwater at our transom. The total price was $550.00. They are well made, look nice, and work great.

  3. #3

    Re: Underwater lights (cost effective)

    Are we allowed to discuss brand and model here? Just curious what you chose.
    Regards
    Dan

  4. #4

    Re: Underwater lights (cost effective)

    kent (shvldis) made his own and they worked fine.
    Scott
    41C117 "Hattatude"
    Port Canaveral Florida.


    Marine Electronics and Electrical Products Distributor.

  5. #5

    Re: Underwater lights (cost effective)

    Quote Originally Posted by Dan Mapes View Post
    Are we allowed to discuss brand and model here? Just curious what you chose.
    If you're posting a positive review on a product or service, there's never a problem. It's the bashing a specific vendor or small company that we need to be careful with.

  6. #6

    Re: Underwater lights (cost effective)

    I have these http://www.barnegatlt.com/Product%20Pics/QLSPL.htm
    They call them swim platform light but I have them on the transom under the water. Have other friends with them on for 5-6 years. Got them through Lewis marine a little over $100 ea. Work great yes I have seen better one but they all were $300 ea and up. Bruce "Johngalt" here has some nice LED ones that were not a heavy hit on the walet. I know why you ask this question some of these light have a Insane price tag.
    Dan
    End Of The Line II
    1967 34C

    EOTL II Rebuild Web Page

    ><(((º>´¯`•.¸¸.•´¯`•.¸¸><((((º>`•.¸¸.•´¯`•.¸><(( (( º>¸¸.•´¯`•.¸¸¸><(((º>

  7. #7

    Re: Underwater lights (cost effective)

    Dan, I have three Abyss S-600 led' s on my transom that I purchased direct from www.abysslite.com for 169.00 each. As Dan[34hatt] says they are very nice lights and only require a 3/8" hole in the transom. They are about the diameter of a hockey puck and half as thick. The install was very simple and took about 2 hours total. The service from the company was first rate. I think though, that if I had to do it again I would spend a little more on the next model up I think it is the S-800 for 230.00 each. I love the lights and get lots of compliments on them, but the murkiness of the water here in the northeast would probably been better handled by the more powerful model. If you are in more southern waters the cheaper lights should be fine. Happy hunting. Bruce aka johngalt

  8. #8

    Re: Underwater lights (cost effective)

    Abyss has raised their prices for the 600 model from $169 to $210.
    They have actually raised all prices. I do not like companies that keep increasing their prices when get promoted in message boards..

    I am looking to buy some of these lights, let me know if you know where I can get them for the original price
    Last edited by akintosyali; 12-19-2007 at 11:11 AM. Reason: typos
    Akin Tosyali
    Hatteras 41 -Barbaros

    Chicago

    Barbaros, Hatteras 41' Before and after restoration

  9. #9

    Re: Underwater lights (cost effective)

    There is a guy over on THT that is making and selling a surface light that looks pretty good.
    Here is the link if it works.

    As seen in this thread http://www.thehulltruth.com/forums/t...d=179810&start...

    They will be slimmer in design and sell for 150.00 each or 125.00 each for two or more. I can make the power exit the back of the unit to straight through the transom or out the top to be run up the transom.

    My PM box is going nuts so please post here with quantity and configuration. If you already PMd me then I already have you down.

    Thanks
    Chris
    "Mambeaux"
    1985 43MY

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts