I am thinking about putting a teak and holly flooring down. Where is the best place to get it? What thickness should i get. I see that it comes in 6mm and up. Any better places to buy than others? Any tricks about install?
Chris
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 8 of 8
Thread: Teak and Holly Sole
-
Teak and Holly Sole
1960 41' Hatteras YachtFish Hull #9
"It's not rough out, Its Hatteras weather!!"
www.captainpete.com
"We Catch'em...Ask around!"
-
Re: Teak and Holly Sole
Chris
I installed a cherry and holley sole in mine last winter. I purchased the wood from East Teak, talk to George. I used marine epoxy to glue the floor down. And Epifanes 2 part for the finish. I posted some pictures.
Chris
-
10-19-2007 08:28 AM #3Senior Member
- Join Date
- May 2007
- Posts
- 193
Re: Teak and Holly Sole
Damn that looks good! I need to lay some of that in my boat, at least down below. Not to steal the thread, but what kind of SF price can you get teak and holly for? And does anyone know a good place down in South Florida?? That floor is awesome!
Skrmetta90
"Longitude 90" - 1973 45C
Biloxi, MS
-
Re: Teak and Holly Sole
shell Hardware (SW27th ave and US1) has a big selection of wood... they have 4x8 sheet of ply with teak and holly, around $170 I think.
they also carry a lot of Teak, Mahogany, Jatoba, etc... that are great for boat projects. Also have many sheets of veneers...
what did you use for the aft deck ? it's obvkioulsy not the teak and holley interior stuff .Pascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat
-
Re: Teak and Holly Sole
I used caulk in the joints on the aft deck and bridge. Keeps it water tight.
On the inside of the boat I used Cherry with Holley strips. My job was all done with 1 7/8" x 3/8" wood. No plywood.
There is a place in Stuart FL that supplies wood and installation epoxy.
www.maratimewoodproducts.com 800-274-8325.
I purchased the epoxy from them.
But I purchased my wood from East teak in SC. 800-338-5636
Chris
-
Re: Teak and Holly Sole
world panel products is the distributor for most of the marine hardwoods, Jensen Beach FL, they have a web site. you can get laminated ply wood which can be a cheeper alternative or get the real stuff in any thickness you desire.
-
10-19-2007 11:50 AM #7Senior Member
- Join Date
- Nov 2006
- Posts
- 174
Re: Teak and Holly Sole
We used the plywood and it went in very nice. I would put it down with the epoxy that worldpanel sells. Polygard is the name I think. Better than West and easier to work with.
-
Re: Teak and Holly Sole
Dan
End Of The Line II
1967 34C
EOTL II Rebuild Web Page
><(((º>´¯`•.¸¸.•´¯`•.¸¸><((((º>`•.¸¸.•´¯`•.¸><(( (( º>¸¸.•´¯`•.¸¸¸><(((º>