These were taken off my 36 when I purchased it. Don't know if they are original. They are the bases only. In OK condition, could use some cleaning. There is also an aluminum mast - don't know what its called but looks to be for pulling in large fish- will sell separate or together. Best offer takes them. Photos below.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 6 of 6
Thread: Lee outrigger bases from 36c
-
04-29-2007 12:55 PM #1
Lee outrigger bases from 36c
Last edited by CDB101; 09-05-2007 at 10:08 PM.
-
04-29-2007 06:33 PM #2Senior Member
- Join Date
- Nov 2005
- Posts
- 50
Re: Lee outrigger bases from 36c
Do you know the inside diameter of the socket end of the tube where the outrigger goes in? Where are they located, hows the finish? Kent
Kent Britting
Makin' Memories 1970 58YF
-
04-29-2007 07:07 PM #3
Re: Lee outrigger bases from 36c
Kent, the outside diameter of the tube is 2" and the inside diameter is 1 7/8" give or take 1/32". The finish on the main tube is good- it appears to be aluminum? The smaller diameter arms are not good but not pitted or coroded, just dull and weathered. The adjusting knobs appear to be bronze or brass but are also tarnished. I think the parts could be cleaned or polished except the 2 smaller arms -looks like they could easily be replaced. Or maybe they could be dipped and refinished. Also, the lenght of the main tube is about 4', the lower arm is 3'2", and the upper arm is 2'. I'm in Cleveland, Ohio.
-Chad
-
05-02-2007 03:13 PM #4Registered Member
- Join Date
- Sep 2006
- Posts
- 18
Re: Lee outrigger bases from 36c
Chad, can you email me a picture of your 36 with them installed?
Thanks,
-Pete
228.222.1428
petebenj@cableone.netFor Pete's Sake 1973 36c
petebenj@cableone.net
-
05-06-2007 06:55 AM #5Senior Member
- Join Date
- Jun 2005
- Posts
- 630
Re: Lee outrigger bases from 36c
Please email me an installed pic as well if you have it. The large pole in the first pic is a gin pole.
colonialseniorliving@yahoo.com
-
06-30-2007 02:31 PM #6Senior Member
- Join Date
- Jul 2005
- Posts
- 70
Re: Lee outrigger bases from 36c
If you still have the outriggers, I'm interested in purchasing them.
Johnny
omecojh@bellsouth.net