Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 21 to 28 of 28
-
Re: What diameter dock lines should I use?
-
Re: What diameter dock lines should I use?
Try Hamilton Marine, still a family owned and operated marine retailer. They just made me a new rode, produced in 4 days, of 300' Yale 3/4" 8 plait spliced to 100' 3/8" ACCO G43 chain and with me picking up it was $1350. Next closest price was 1850 and that was R&W Rigging in New Bedford MA. On top of that R&W couldn't promise domestic materials I'm sure youll find their price and service more than acceptable. https://hamiltonmarine.com/splicing/
Last edited by bostonhatteras; 04-14-2024 at 07:59 AM.
-
Re: What diameter dock lines should I use?
Watch out for the Chinese stuff. A friend had a connection with a “windage” company in Baltimore. Got a good deal on several spools. Spool was marked 3/4 but measured somewhere between 5/8-3/4 with the caliper. Was hard to splice too.
"DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN
Endless Summer
1967 50c 12/71n DDA 525hp
ex Miss Betsy
owners:
Howard P. Miller 1967-1974
Richard F Hull 1974-1976
Robert J. & R.Scott Smith 1976-present
-
04-14-2024 09:02 PM #24
Re: What diameter dock lines should I use?
I always go with the largest that are designed for my boat's cleats. Formula I was taught was 1/16" of line diameter per every inch of cleat length. So a 12" cleat would use a 3/4" line. An 8" cleat a 1/2" line etc.
-
04-15-2024 01:01 PM #25
Re: What diameter dock lines should I use?
Just replaced my lines on my 1976 58 LRC that weighs in around 50 tons.
Used 3/4" double braid all around. Had them put a 36" eye splice on one end of each line and added built in chafe protection on the eye.
Had four (4) 40' lines and four (4) 75' lines custom made.
Paid $145 each for the 40 footers and $185 each for the 75 footers.
Had a custom red, white and blue tracer pattern done as well.
They were great to work with and delivered as promised. Would use them again in a New York minute!
Home - Miami CordageJD
1976 58' LRC Hull #311
"Miss Maggie"
Riviera Dunes, FL
-
Re: What diameter dock lines should I use?
The other thing is cleat size. Most Hatt cleats will only handle 3/4 if you have 2 lines per cleat.
"DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN
Endless Summer
1967 50c 12/71n DDA 525hp
ex Miss Betsy
owners:
Howard P. Miller 1967-1974
Richard F Hull 1974-1976
Robert J. & R.Scott Smith 1976-present
-
04-16-2024 08:44 AM #27
Re: What diameter dock lines should I use?
My new lines from Miami Cordage..
New Lines 003.jpgNew Lines 004.jpgNew Lines 005.jpgJD
1976 58' LRC Hull #311
"Miss Maggie"
Riviera Dunes, FL
-
04-16-2024 08:45 AM #28
Re: What diameter dock lines should I use?
More pics of new lines...
New Lines 006.jpgNew Lines 002.jpgJD
1976 58' LRC Hull #311
"Miss Maggie"
Riviera Dunes, FL