Hello I’m in search of rudder ports as well as replacement rudders for my 1962 Hatteras 34 sc trunk cabin. It looks like the original shafts are 1 1/2 inch diameter. Any body have any laying around?!
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 4 of 4
Thread: Rudder and rudder ports
-
03-26-2024 02:32 PM #1
Registered Member
- Join Date
- Dec 2023
- Posts
- 3
Rudder and rudder ports
-
Re: Rudder and rudder ports
Should be pretty easy to find a pair of new rudders with 1-1/2" shafts. Original set was probably too small anyway, just have them machined to accept the tiller arms, etc. Probably should post a photo of the rudder ports or what's currently attached to the hull, lots of options for replacement rudder ports including dripless.
CRICKET
1966 HAT50C101
Purchased 1985 12v71Ns
Repowered 1989 with 8v92TI
Repowered 2001 with 3406E
-
Re: Rudder and rudder ports
-
Re: Rudder and rudder ports
Buck-Algonquin was the original supplier of these parts to Hatteras. If you haven't asked Sam's about what you need, I would start with them. Buck was bought by Hydrasearch, here in Maryland. They are often difficult to reach, but if you can get through, they can probably help you out.