Hi everyone, new to group.
Just bought a 64 MY and none of the tachs work.
I get conflicted info looking around online.
Any help is appreciated.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 7 of 7
Thread: Tach drives for helm gauges
-
01-23-2024 05:10 PM #1Senior Member
- Join Date
- Jan 2024
- Posts
- 58
Tach drives for helm gauges
-
Re: Tach drives for helm gauges
Using the search function at the top right corner has proven to be very helpful and a fresh post to bring things up.
ENUFF. 1983 53MY.Hull #617 Barnegat Light Nj.
-
01-24-2024 05:58 AM #3Senior Member
- Join Date
- Jan 2024
- Posts
- 58
Re: Tach drives for helm gauges
Mad Hatter53
That did help a little, going back to boat thursday to check some things out.
dont even know why i didnt see the search box
Thanks.
-
Re: Tach drives for helm gauges
You probably have the Sun tach drive sender attached at the Glendenning synchronizer. First, does the synchronizer work? If so, then your tach cables are good. Next look at the wires attached to the Sun drives. Make sure those are connected there and to the tach gauges. It is probably a bad tach cable or sender.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
01-24-2024 05:55 PM #5Senior Member
- Join Date
- Jan 2024
- Posts
- 58
Re: Tach drives for helm gauges
SkycheneyJust purchased this vessel so im not familiar with its intricasiesWhere might these items be located? Behind the tachs?On the engines themselves?Thanks.
-
-
Re: Tach drives for helm gauges
Tach drives for cable and signal generator...Mine were on the back of the engine on one of the accesory drives.DSCN0200.JPG
yachtsmanWILLY
I used to think I knew everything until I found the experts HERE; Now I know I dont know SQUAT
www.flybridge.proboards.com
Uncensored, no nonsense boating fun for adults