It's that time. Aslan needs a new bottom. Last job was June of 2015 using:
--2 coats of Interlux Micron CSC-Blk
--1 coat (waterline) of Interlux Ultra w/Biocide-Blk
Aslan in is a high flow tidal area (Stono River, Charleston, SC); ebb tide can exceed 2 knots. The water temp has reached 84 degrees--some of the gulls have started hiring divers.
So, for folks in similar conditions...
1. What are your recommendations for an ablative paint?
2. What are your recommendations for the running gear?
Thanks for your input!
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 13
Thread: Bottom Time Again
-
Bottom Time Again
Semper Siesta
Robert Clarkson
ASLAN, 1983 55C #343
Charleston, SC
-
09-05-2018 11:35 AM #2
Re: Bottom Time Again
Did you feel the paint last time worked well?
I use micron 66 but it's not good in freshwater. Brackish depends.
I'm trying a micropolymer for the props on some boats this month.
PM me and I can get you details.Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
09-05-2018 11:55 AM #3Senior Member
- Join Date
- Jun 2007
- Posts
- 4,974
Re: Bottom Time Again
I tried and am happy with bluewater. Half the price of CSC. I made a thread about it, but look at post #14 for contact info for the salesman that gives the discount and free shipping.
https://www.samsmarine.com/forums/sh...996#post308996FTFD... i drive a slow 1968 41c381
-
09-05-2018 12:24 PM #4Senior Member
- Join Date
- Nov 2006
- Posts
- 1,219
Re: Bottom Time Again
Thanks, Krush, for the info and taking the time to document! Almost time for me as well...
DAN
-
-
09-05-2018 12:50 PM #6Senior Member
- Join Date
- Nov 2006
- Posts
- 1,219
Re: Bottom Time Again
Was just looking into that. I was last hauled in San Diego but used KKMI here.
The (new) Svendson's Bay Marine is just around the corner from me but my discount buddy is gone, so may make the trip to Napa Valley Marina and perform much of the labor at my leisure.
How about you? Any recommendations for those of us in the area?
DAN
-
09-05-2018 01:08 PM #7
Re: Bottom Time Again
I use this, and am in the same waters.
https://www.seahawkpaints.com/product/cukote/
I use prop speed also. For me, the condition of the metal has always been the weak link in waters ga to nc. Pricey, but seems to extend need for a bottom job one more season. Diver says he does not need to scrape my metals. Not sure I get the value I should, but it does help.Mal
Miss Molly
'85 53ED #750
-
-
Re: Bottom Time Again
Jotun ablative, excellent protection, worth checking out.
-