What have you used to glue veneer to a plywood substrate? Is there a particular brand that excels? Thanks!
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 6 of 6
Thread: Laminating afromosia veneer
-
Laminating afromosia veneer
-
07-20-2018 07:42 AM #2Senior Member
- Join Date
- Sep 2013
- Posts
- 165
Re: Laminating afromosia veneer
contact cement
-
Re: Laminating afromosia veneer
I use Wellwood contact cement. It s always a little tricky with large pieces because the veneer isnt as rigid as formica
Pascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat
-
Re: Laminating afromosia veneer
Thanks, yes I was afraid something like a wood glue would bleed through.
-
07-20-2018 09:15 AM #5
Re: Laminating afromosia veneer
It depends on the laminate. Some have a backing and can use wood glue.
Check with the supplier.Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
Re: Laminating afromosia veneer
Thanks Scott.