The 32V combo masthead/anchor light on my boat has seen the end of its life. It uses a surgical lamp type bulb that is almost impossible to find and now the plastic housing has broken. I am having difficulty finding a similar lamp however I did find a Perko 1197 combo that uses either a 12V or 24V festoon bulb. My thoughts were to buy this one and put a 32V festoon bulb in it. I emailed Perko to make sure if this was ok and their response was "sorry we do not offer this in 32V at this time" Not answering my question. What are those of you with 32 volt systems using for combination mast head/anchor. My boat is too long to just use an all around white light. I know I can put a convertor down by the switch and somehow wire both the anchor & nav legs to it but dont really want to be dependant on that if it were to go out. Any suggestions are appreciated.