Needing to replace both of my 12VDC engine room blowers, according to the drawings the only way to access is to Pull the interior wallboard on either side. and they are supposed to be mounted there. Do not want to pull paneling unless necessary, anyone have experience with this And also want to have the correct ones in hand once I do the task...are they Flange mounted or on Stands, any guidance is much appreciated
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 7 of 7
-
06-25-2018 06:44 PM #1Registered Member
- Join Date
- Aug 2014
- Posts
- 16
1985 43MY Engine Room Blower Location??
-
06-25-2018 07:20 PM #2
Re: 1985 43MY Engine Room Blower Location??
if they're original and still in the original locations I'd be amazed. Then again they're probably not working if they are.
I don't know how hard it is to pull the wall panels in hour boat but in my 41c easy.Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
Re: 1985 43MY Engine Room Blower Location??
Jonathan Brein
1982 43' DCFB #550
"Paragon"
Chesapeake, Virginia
-
Re: 1985 43MY Engine Room Blower Location??
I had to cut an access hole in the starboard engine room forward wall to find the generator blower, it was tucked behind it. Unbelievable.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
06-25-2018 11:27 PM #5Registered Member
- Join Date
- Aug 2014
- Posts
- 16
Re: 1985 43MY Engine Room Blower Location??
Thanks for the inputs...Next step it to take a small child with me to see if they can get to the area to look form them before I pull panels
-
06-26-2018 01:18 PM #6Registered Member
- Join Date
- Mar 2015
- Posts
- 4
Re: 1985 43MY Engine Room Blower Location??
They are behind the paneling. Take your time removing. Easy job on my 1986.
-
06-26-2018 06:21 PM #7Registered Member
- Join Date
- Aug 2014
- Posts
- 16
Re: 1985 43MY Engine Room Blower Location??
thanks ScottyB...DO you know if they should be Flange or Stand mount type ?