Does anyone have experience with the CZone Signal Interface or frankly other CZone products?
I am considering installing one to pickup all 6 tank senders we have onboard. It looks like I will need a pc interface to program it.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 9 of 9
Thread: CZone Signal Interface?
-
06-20-2018 07:14 PM #1
CZone Signal Interface?
-
06-20-2018 07:21 PM #2
Re: CZone Signal Interface?
If Its NMEA2000 it may be supported on your electronics.
Most of their product is.Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
06-20-2018 07:37 PM #3
Re: CZone Signal Interface?
Yes that is precisely what I seek. Have you programmed them at all?
I am a bit burnt by the quirks of the MD33 and EMU-1 so i am hoping to do some more research this time before i buy hardware that I cannot use as planned.
-
06-20-2018 07:40 PM #4
Re: CZone Signal Interface?
C-zone is a system. I'm not sure about the single unit as a stand alone. Your local C-zone dealer should be able to get you the info and setup up your system.
It's not a DIY thing.Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
06-20-2018 11:03 PM #5
Re: CZone Signal Interface?
I’m not convinced that it’s not diy able:https://www.panbo.com/czone-signal-i...S0y/0/Software is public domain as well as the adapters and cables, but I’ll need to do more reading.
-
06-20-2018 11:41 PM #6
Re: CZone Signal Interface?
Ok so maybe it's something some can do but it's not a simple DIY project as in plug and pray.
Time is valuable to all of us. Some enjoy fiddling with things like that. Other go fishing, cruising, diving ...Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
06-21-2018 12:42 AM #7
-
06-21-2018 12:31 PM #8
Re: CZone Signal Interface?
As a side note, it surprises me that it's so hard for companies to put together a analog to NEMA convertor that works and is field adjustable. They are simple senders! None of the ones i have seen so far have simple plotting or scaling capability that you can adjust as an installer/user. Not all senders have linear guage curves. I just don't get it!
-
06-21-2018 11:42 PM #9
Re: CZone Signal Interface?
How many will you buy. It's all about the return on investment to make it.
Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.