blew a coolant hose yesterday, caught the temp rising just as it hit 180. Shut the motor off and was towed in by an excellent Capt Lee and Tim from Tow Boat US Beaufort, NC. Replaced the hose but was reflecting on the possibilities from overheat (although minimal) and my gut told me to check the oil. Really? Dipstick read almost 4" above the full mark. Checked the gear level to ensure I didn't blow a seal under tow but gear level was perfect. Drained the oil and got 4+ gal of other than oil fluids in the beginning of the drain.
Suggestions where I go from here to determine where the intrusion occured
https://youtu.be/p05nfk6hNMU?
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 58
Thread: coolant in 12v71 oil
-
05-16-2018 08:28 PM #1
coolant in 12v71 oil
-
05-16-2018 08:45 PM #2
Re: coolant in 12v71 oil
That's definitely not Detroit oil. At least it's not mixed in and all over the engine.
Drain the rest of the coolant ASAP.
Get some oil in there to protect the parts that are good.
I'd look for a good Detroit guy who has experience with your engines or it may be time for a complete overhaul. It can be a lot of things soScott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
Re: coolant in 12v71 oil
Wow. That looks like all coolant and no oil. Yep. Better drain and refill with oil ASAP. Should run it for a minute to circulate the new oil and coat the parts as well.
-
05-16-2018 09:43 PM #4
Re: coolant in 12v71 oil
Don't run it it will mix the oil with the fluid and make things worse.
Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
05-16-2018 10:01 PM #5
Re: coolant in 12v71 oil
looks just like fleet charge coolant. wonder if a heat exchanger failed letting the coolant into the oil causing it to over heat. And hose blew as a result?? Seems like it would be more than a blown hose to cause coolant to get into oil
-
05-16-2018 10:16 PM #6
-
05-16-2018 10:36 PM #7
Re: coolant in 12v71 oil
Interesting thought that something major occurred before the hose blew, guess I never thought of that, automatically associated the overheat with the hose splitting and spewing coolant everywhere
-
05-16-2018 10:37 PM #8
-
05-16-2018 10:39 PM #9
-
05-16-2018 10:43 PM #10
Re: coolant in 12v71 oil
The coolant hit the oil pan after the engi e was shut down or it would be mixed and emulsified
Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.