Hatt 34 with 1 3/8 shafts. Which strut bushing it uses??
1 3/8 ID X 1 7/8 OD
1 3/8 ID X 2 OD
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 5 of 5
Thread: Hatt 34 strut bushings
-
04-19-2018 08:13 PM #1Senior Member
- Join Date
- Apr 2005
- Posts
- 266
Hatt 34 strut bushings
-
04-20-2018 08:41 AM #2
Re: Hatt 34 strut bushings
My guess is the boats a gasser. If memory serves ( last gasser I worked on was 5 years ago ) is the larger OD was the standard BUT who knows what has been done in the last 50 years.
How are you changing them? Will the boat be on the hard for some time?Scott
41C117 "Hattatude"
Port Canaveral
I have no idea what the last poster is saying. I don't think he does either.
-
Re: Hatt 34 strut bushings
Well the original diesel boats also had 1 3/8' dont remember the o.d I could have measure it 8 days ago but now I would have to get wet and water is to cold for that still
Dan
End Of The Line II
1967 34C
EOTL II Rebuild Web Page
><(((º>´¯`•.¸¸.•´¯`•.¸¸><((((º>`•.¸¸.•´¯`•.¸><(( (( º>¸¸.•´¯`•.¸¸¸><(((º>
-
04-20-2018 01:45 PM #4Senior Member
- Join Date
- Apr 2005
- Posts
- 266
Re: Hatt 34 strut bushings
Mine has detroits 453t. Boat is hauled out for the next few months. I'll be replacing the thru hulls, replacing the bolts that hold the struts to the hull, painting the hull etc. I'll remove the struts from the boat and use a press.
-
04-21-2018 07:59 PM #5Senior Member
- Join Date
- Apr 2005
- Posts
- 266
Re: Hatt 34 strut bushings
Removed one of the struts today and measured it.
Its 1 3/8 ID X 2 1/8 OD.Last edited by micky; 04-23-2018 at 05:49 PM.