Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Results 1 to 5 of 5
  1. #1

    Hatt 34 strut bushings

    Hatt 34 with 1 3/8 shafts. Which strut bushing it uses??

    1 3/8 ID X 1 7/8 OD
    1 3/8 ID X 2 OD

  2. #2

    Re: Hatt 34 strut bushings

    My guess is the boats a gasser. If memory serves ( last gasser I worked on was 5 years ago ) is the larger OD was the standard BUT who knows what has been done in the last 50 years.

    How are you changing them? Will the boat be on the hard for some time?
    Scott
    41C117 "Hattatude"
    Port Canaveral Florida.


    Marine Electronics and Electrical Products Distributor.

  3. #3

    Re: Hatt 34 strut bushings

    Well the original diesel boats also had 1 3/8' dont remember the o.d I could have measure it 8 days ago but now I would have to get wet and water is to cold for that still
    Dan
    End Of The Line II
    1967 34C

    EOTL II Rebuild Web Page

    ><(((º>´¯`•.¸¸.•´¯`•.¸¸><((((º>`•.¸¸.•´¯`•.¸><(( (( º>¸¸.•´¯`•.¸¸¸><(((º>

  4. #4

    Re: Hatt 34 strut bushings

    Mine has detroits 453t. Boat is hauled out for the next few months. I'll be replacing the thru hulls, replacing the bolts that hold the struts to the hull, painting the hull etc. I'll remove the struts from the boat and use a press.

  5. #5

    Re: Hatt 34 strut bushings

    Removed one of the struts today and measured it.

    Its 1 3/8 ID X 2 1/8 OD.
    Last edited by micky; 04-23-2018 at 05:49 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts