Does any one have a recommendation for a good hull or engine surveyor? We have come to terms with the seller and now it is time for due diligence. I have used the search function, which is not all that helpful, but it mostly was for the Lauderdale area or the Gulf.
I have left a message with Marc Slakoff and am awaiting a response. The selling broker suggested Bill Gladding of Gladding Marine or Gary Frankovich, does anyone know of them?
The boat is a 63' CPMY with 12/72TI's at 650hp and a compression test was performed about 50hrs ago when all the injectors were replaced and showed all cylinders to be 460/440 psi except for one at 430psi. I was told that 425psi was the service limit. I would think that in this case I need a good DD guy to have a look-see.....
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
Results 1 to 8 of 8
Threaded View
-
03-13-2018 02:06 PM #1Senior Member
- Join Date
- Jul 2007
- Posts
- 1,001
Hull and Engine surveyor in Jacksonville