32v Oil pressure gauges

[ohiohatteras]

My brother is in need of two, 2" VDO oil pressure gauges in 32 volts for his 8v92's. If you know where any are or know of a place that rebuilds them, please PM me.
Thanks

[KPTIM]

PM sent.

[ohiohatteras]

My brothers boat is a 1989 50' Bertram......

But figured you guys would know where to find them.....

[GJH]

Lauderdale Speedo:

https://www.lspeedo.com/

Very helpful to me with same engines and voltage... best bet is to just call them.

EDIT: better yet, it looks like Sam's may have some too. Look under senders and give them a call.

http://parts.samsmarine.com/PartSearch/BrowsePart.cfm

[Briankinley2004]

Are you sure the gauges are 32 volts? I recently found out on my 32 volt Hatteras that all the gauges are 12 volt but the light bulb circuit is 32v. There is a convertor in the bridge installed by Hatteras that changes the 32volt to 12 for the instruments. I would be willing to bet his are the same.

[Chrisdstn]

Instrument Exchange in Houston, Texas rebuilt my port/strb tach angle drive off of the 8v92 and I sent the original strb oil pressure gauge to check it but it worked. My boat is original 1984 52c with 32v system.